Skip to main content

Pair remotes with your COROS helmet

  • Updated

If those who have more than one bike, it can be cumbersome to move the remote and holder between multiple bikes. A great solution is to order spare remotes for your bikes via https://us.coros.com/accessories.php.

However, only one remote can be paired with one helmet/phone. You are required to go through the remote pairing process if you need to use a different remote on another bike. 

 

OMNI and SafeSound remote pairing

  • Power on the helmet, open the COROS app and make sure the helmet is active on the Device page. 
  • Tap the helmet image to open a new page with additional settings. 
  • Select "Remote" and follow the instructions to complete the pairing process.
  • 4-digit ID for the remote can be found at the bottom of the rear side of the remote and under FCC ID. 
  • The center yellow button should light up when any button is pressed. If not, please check below for tips on fixing your remote. 

Remote_Pairing.gif

 

LINX remote pairing

  • Power on the helmet, open the LINX app and make sure the helmet is active on the Device page.
    • Download the LINX app from the iOS App Store or Android apk link. 
    • Tap the helmet image to open a list and select the helmet to complete the pairing with the app.
    • Helmet can't be added to the LINX app if it's been added to the COROS app. 
    • Use the LINX app for remote pairing only. 
    • Use the COROS app for other features. 
  • Select "Remote" and follow the instructions to complete the pairing process.
  • The center yellow button should light up when any button is pressed. If not, please check below for tips on fixing your remote. 

 

Remote not working?

  • SafeSound/OMNI doesn't share the same remote with LINX. Please make sure you have the correct remote for your helmet. 
    • SafeSound/OMNI remote
      • Center yellow button displays a caller icon and play/pause icon. 
    • LINX remote
      • Center yellow button displays a U or C shaped icon. 
  • Ensure the battery is functioning. 
    • A CR2032 battery is required. 
    • Replace with a new one if necessary. 
  • Ensure the battery placement is correct.
    • The positive should face towards you. 
    • Reverse the battery placement and try again. 

Related articles