COROS NOMAD comes with a COROS charging adapter that works with any standard USB-C cable.
The adapter is housed in a protective keychain case. To charge your COROS NOMAD, you will need to first remove the charging adapter from the silicone case by gently pulling down on one end of the case until the edge of the adapter releases. Then use your fingers to pull the adapter completely out of the case.
Next, locate the charging port on the back of COROS NOMAD. The metal pins on the charging adapter fit snugly into the charging port. Plug in the adapter to COROS NOMAD until it snaps into place. The adapter will lie flush against the back of the watch.
Finally, plug in a standard USB-C cable to the other end of the charging adapter. Once your USB-C cable is connected to power, your COROS NOMAD will begin charging.
COROS NOMAD supports charging in the middle of recording an activity. Charging the watch will not pause or interfere with the activity recording. If you decide to charge your COROS NOMAD with a battery pack or power bank, do not use a battery pack with quick-charge capability.
Important: Please use a charger that complies with LPS specifications (marked with "LPS", or "Limited Power Supply") to charge COROS NOMAD. Please use official accessories for charging only and do not use other methods for charging.