Skip to main content
Deutsch Español Français Italiano (Italia) 日本語 Polski Português do Brasil Русский ไทย Tiếng Việt (Việt Nam)

Operate the COROS PACE Pro Watch

  • Updated

Start, turn off, restart and reset

  • Start
    • Press and hold the lower button (Back/Lap button) for 2 seconds or until the COROS logo shows up.
  • Turn off
    • Main watch face → System → More Settings → Turn Off
  • Restart
    • Press and hold the lower button (Back/Lap button) for 15 seconds or until the COROS logo shows up.
    • Alternatively, turn off the watch by main watch face → System → More Settings → Turn Off. Then turn it back on.
  • Reset
    • Main watch face → System → More Settings → Reset All.
      • Resetting the watch won't affect the data already synced to your COROS app. 

Device Overview

PACE_2.jpg

  • 1 (Digital Dial/CONFIRM):
    • Rotate to switch the selection up and down
    • Rotate to switch the daily widgets
    • Rotate to switch data pages during activities
    • Press to confirm a selection
    • Press to open main menu
    • Hold to finish a workout
  • 2 (BACK/LAP/POWER):
    • Press to return to the previous screen
    • Press to record a manual lap or rest during workouts
    • Press to skip to the next session in Interval Training mode
    • Press to change the display of different data on the main watch face
    • Hold to open Toolbox/shortcut menu
    • Hold to exit additional features like Stopwatch and Timer
    • Hold to power on or restart the watch

Can’t turn on your COROS watch?

  • Charge the watch for over 2 hours even if the screen doesn’t turn on. 
  • Remove the charging cable from the watch (this step is very important).
  • Press and hold the POWER Button for over 15 seconds or until the COROS logo shows up to restart the watch.

Please don’t press both buttons on your COROS watch at the same time. Otherwise your watch will enter Inactive mode and will not respond to normal operation or charging. Please power off the watch if you plan to stop using it - main watch face → System → More Settings → Turn Off.

Can’t unlock your COROS watch?

If a lock sign shows up on the watch face when you operate the buttons, you need to unlock the watch display first. This prevents any button mis-operation that may affect your daily and workout usage. Depending on the Auto Lock mode, you can unlock the display by the following steps.

  • Auto Lock – Hold to Unlock
    • Press and hold the Digital Dial or the BACK/LAP button to unlock the display
  • Auto Lock – Scroll to Unlock
    • Scroll the Digital Dial in any direction until the locked sign changes.

Here’s how to adjust the Auto Lock mode setting:

  • Main watch face → System → More Settings → Auto Lock → Standby Mode | Activity Mode → Scroll to Unlock | Hold to Unlock | OFF
  • Once Auto Lock mode is activated, the display will automatically lock if:
    • - Display is idle for 2 minutes in Standby mode
    • - Display is idle for 10 seconds in Activity mode

Related articles