Base Fitness measures the ability to take on exertion from long-term training. It is calculated based on your training load in the past 6 weeks which is essentially your fitness level with an exponentially weighted model. A higher value means your body is capable of training longer and more frequently at higher intensity. Base Fitness will gradually decline if you decrease volume and intensity of training compared to 6 weeks ago.
4-week Intensity Distribution
- Each training phase may focus on a different intensity. It is usually recommended to start off with low intensity early in the season and gradually increase the portion of medium to hard training. 4-Week Intensity Distribution breaks down your past 4 weeks’ training based on threshold zones to help you understand if it aligns with your plan. If your goal is to train hard but the 4-week intensity distribution shows that most of the training is easy, it is time to adjust your training focus and increase the intensity to spend more time in higher threshold pace zones.
-
There are 3 different intensity levels to categorize your road running. Threshold heart rate zones are used for all other workout types.
- Easy: Threshold pace zone 1 or below
- Medium: Threshold pace zone 2 and 3
- Hard: Threshold pace zone 4 or above
7-Day Total Load & Recommendation
- 7-Day Total Load measures the total training load in the last 7 days. COROS evaluates if your recent training load is reasonable and recommends a zone that is least likely to get you injured while maximizing the training outcome based on your training history. If your 7-Day Total Load is higher than the recommended zone, you may consider reducing your training intensity to allow your body to recover more.
Load Impact divided by Base Fitness yields your Intensity Trend. This metric reflects the amount of fatigue your body is suffering from the recent training while considering your ability to sustain the impact. A low value means that your body is ready to take on more intensity while a high value indicates overtraining.
Many people may think load impact is your fatigue. Here's an example to explain the difference. While the load impact of a 100k training week may be similar for you and Eliud Kipchoge, the amount of fatigue left in your body can be entirely different because Eliud’s base fitness may be way above yours. To achieve the best race result or your best day in the mountains, you want the base fitness to be as high as possible, and fatigue to be low but not too low as this can lead to a decline in base fitness.
Intensity Trend is a powerful and objective tool to help provide accurate feedback to avoid injuries and adjust your training plan to reach the expected training outcome. To give the best recommendation, COROS has set 5 different fatigue zones for you. You will want to be in the Optimized zone (100-149%) for maximized training efficiency, and in the Performance zone (50-79%) for race days. The concept of tapering is to take your body from the optimized zone to the performance zone.
- Excessive (≥150%): Recent training may be overreaching or excessive.
- Optimized (100-149%): Productive training is increasing Base Fitness.
- Maintaining (80-99%): Moderate recent Training Load; maintaining Base Fitness.
- Resuming/Performance (50-79%): Resuming represents Increased Training Load is improving your fitness. Performance represents you are ready to take on significant physical effort.
- Decreasing (0-49%): Low recent Training Load; Base Fitness is declining.
Load Impact measures the amount of impact brought to your body from short-term training. It is calculated based on the training load in the last 7 days with an exponentially weighted model. A higher value means a higher impact is introduced to your body and will limit your performance from tiredness. Load Impact goes down if you take more rests and up if you train more.
EvoLab provides race time and race pace estimates for 5k, 10k, half marathon, and full marathon based on your past 6 weeks’ training via your COROS watch and the COROS app. With this race predictor, you can plan your race strategy accordingly.
It is rare for someone to train for a 5k and a marathon at the same time, so different types of workouts will impact different race distance predictions. Long runs over 30k have a major impact on your marathon prediction while a 60-minute threshold pace run will mainly affect your 10k or half marathon estimates.
To get the best improvement to your fitness, you will have to train with fatigue, but training when you are too tired can easily lead to injury. After each training, the recovery timer provides feedback on the time needed to receive full recovery. The more you train with your COROS watch, the more accurate feedback it will give you as EvoLab keeps learning your fitness data.
Currently, the countdown is designed to be used during a training block with a maximum recovery time set to 96 hours or 4 days. Don’t be surprised if it tells you that you are ready to train hard again in a few days after a 100-mile race as most people will take an extended recovery following a goal race or completed training block. Please listen to your body, take enough rest, and start using the recovery timer again when you are ready to kick off a new training session.
- 0% - 29%: Please rest
- 30% - 89%: Ready for easy training
- 90% - 100%: Ready for hard training
EvoLab provides race time and race pace estimates for 5k, 10k, half marathon, and full marathon based on your past 6 weeks’ training via your COROS watch and the COROS app. With this race predictor, you can plan your race strategy accordingly.
It is rare for someone to train for a 5k and a marathon at the same time, so different types of workouts will impact different race distance predictions. Long runs over 30k have a major impact on your marathon prediction while a 60-minute threshold pace run will mainly affect your 10k or half marathon estimates.
Running Performance is created to provide feedback on how good your last run is compared to your overall running fitness. The range goes from 80% to 120% and has five different levels from poor to excellent. Over 105% means you are outperforming yourself and likely to peak in races. Lower than 95% indicates that you may need more rest to bounce back
Running performance may not be available for the last road run if the workout is not over 10 minutes or if the intensity is too low.
The range is from 80% to 120% and has 5 different levels.
- Poor: (80% – 95%)
- Fair: (96% – 98%)
- Good: (99% – 101%)
- Great: (102% – 104%)
- Excellent: (105% – 120%)
VO2 Max is the maximum amount of oxygen your body can consume during training. It is a very popular metric in a variety of training systems. A higher VO2 Max usually means better fitness. COROS estimates running VO2 Max based on workout data including heart rate and pace from your recent outdoor runs, which is tested to be very close to the lab test results. Also, VO2 Max is not a metric that should change drastically in a short term. The VO2 Max estimates from EvoLab are much more stable than those offered by other brands.
Running Fitness represents your marathon performance. Your individual Running Fitness Breakdown scores indicate your relative strengths and weaknesses at different efforts.
Lactate Threshold is the breaking point when aerobic training starts to transform to anaerobic training. It can also be defined as the intensity of training at which lactate acid begins to accumulate in the blood faster than it can be removed. It is a popular indicator used in competitive sports. In addition to the traditional heart rate zones, we’ve now introduced 6 threshold pace zones representing different focuses in training. Threshold pace zones are a great tool to measure your effort and it eliminates any issues that could develop with your heart rate readings.
EvoLab recommends personalized threshold heart rate and pace zones as the default setting based on your general fitness level. To better suit your training, you can edit the default zones or choose other heart rate zones such as max heart rate zones or heart rate reserve zones. Training at each zone has a unique effect on your body and fitness. You can improve base endurance, lactate threshold, anaerobic endurance by training at associated zones.
Below are the details of the default threshold heart rate and pace zones and they may not match the zones that are edited manually.
-
Heart Rate Zone 1 & Pace Zone 1 (Aerobic Endurance Zone)
- The pace in this zone is comfortable enough to maintain conversations. It is suitable for basic cardiopulmonary function training, which mainly exercises basic aerobic capacity.
- Easy runs usually fall into this category.
-
Heart Rate Zone 2 & Pace Zone 2 (Aerobic Power Zone)
- The pace in this zone is moderate. You tend to take more deep breaths and it is getting hard to maintain conversations. It is suitable for marathon endurance training and improves the ability to control the rhythm in races.
- Race pace training usually falls into this category.
-
Heart Rate Zone 3 & Pace Zone 3 (Threshold Zone)
- The pace in this zone makes you a bit uncomfortable and breathe fast. It mainly strengthens the ability to remove lactic acid in your body to increase threshold pace.
- 10-min fast runs usually fall into this category.
-
Pace Zone 4 (Above Threshold Zone)
- The pace in this zone makes you slightly uncomfortable and breathe fast. It mainly strengthens the ability to remove lactic acid in your body to increase threshold pace.
- 10k race pace training usually falls into this category.
-
Heart Rate Zone 4 & Pace Zone 5 (Anaerobic Endurance Zone)
- The pace in this zone makes you uncomfortable and causes shortness of breath. It applies to high-intensity interval training, which mainly improves VO2 Max level.
- 5-min interval runs usually fall into this category.
-
Heart Rate Zone 5 & Pace Zone 6 (Anaerobic Power Zone)
- The pace in this zone makes you struggle to breathe. It is suitable for anaerobic training which improves anaerobic capacity and muscular endurance.
- 1-min interval runs usually fall into this category.
- If the heart rate or pace readings are below Zone 1 (Aerobic Endurance Zone), they will not show up in the heart rate or pace zones summary on the workout details page on the COROS app.
How to download training programs by COROS athletes and coaches
Use the default browser to visit the verified programs page. Tap on "Get It Now" to view the workout details. Scroll down and tap on "Get It Now" and select "Open in COROS". You can then save the workout to your COROS account and it will be accessible from the Profile page > Training Plan Library. When prompted to add the training plan to your calendar, you can select "Continue" and choose a date to start the new plan.
How to design a workout/training plan on the COROS app
- Open COROS APP
- Select EvoLab tab in your COROS APP
- Scroll down and select “Workouts” or “Training Plan”
- Click “Create Workout” or “Create Training Plan”
- Select Activity and then follow cues on screen
- How to Create and Follow a Training Plan
- Open the COROS APP
- Select EvoLab tab in your COROS APP
- Scroll down and select “Training Plans”
- Select your training plan
- Click “Start Training Plan”
- Sync with your device
- When performing your next workout, your watch will ask you to start that days training
- Follow cues on your watch screen
- How To Use Pre-Designed Workouts
- Select EvoLab tab in your COROS APP
- Scroll down and select “Workouts”
- Select your desired workout
- Select “Sync With Your Watch”
- On your watch, scroll to “Training”and locate your workout
- Select workout and follow cues
How to download workouts and training plans from TrainingPeaks to your COROS watch
- Update your COROS app to the latest version.
- Disconnect and reconnect the TrainingPeaks account on your COROS app > Profile page > 3rd Party Apps > TrainingPeaks after the app update.
- TrainingPeaks Training Plan will show up on the COROS app > Profile page > Training Plan section within a few minutes if you have a valid plan/workouts in the TrainingPeaks calendar.
- If you have made changes to your TrainingPeaks calendar, manually sync the changes to your COROS app via the top right icon with the TrainingPeaks plan section.
- Tap Start Training Plan to send the plan to your COROS watch.
- Every time the watch syncs with the COROS app, it will receive the updated training plan from your TrainingPeaks calendar.
-
TrainingPeaks plan can be exited by swiping left. However, this plan will remain in the plan library due to the current integration setup and cannot be removed.
-
Currently, COROS only supports the following workouts from TrainingPeaks. All other workout types will not be synced to the training plan section on your COROS app/watch. We may add more categories in the future.
- Run
- Bike
- Swim
- Strength
-
Currently, COROS only supports the following workouts from TrainingPeaks. All other workout types will not be synced to the training plan section on your COROS app/watch. We may add more categories in the future.
Training Effect is determined by training load per minute and evaluates how your training impacts both your aerobic system (from cardio building activities) and anaerobic system (from high-intensity interval training). What divides these two groupings is your Lactate Threshold. Generally, a lower load per minute below the lactate threshold intensity will help your aerobic fitness and a higher load above lactate threshold intensity will improve your anaerobic fitness. Both the aerobic and anaerobic training effects have the same scale from 0-5+ or inefficient to overreaching.
There are 6 different types of aerobic and anaerobic training effects:
- Inefficient (0-0.9): Minimal effect on fitness
- Recovering (1.0-1.9): Good for recovery but low on fitness improvement
- Maintaining (2.0-2.9): Maintaining fitness
- Improving (3.0-3.9): Improving fitness if repeated 2-4 times per week
- Optimized (4.0-4.9): Improving fitness efficiently if repeated 1-2 times per week
- Overreaching (5.0-5.9): Improving fitness significantly with sufficient recovery or may lead to overtraining
Training Focus measures the primary improvement based on the training load and intensity at the end of your run. The workout will be labeled with one of six different Training Focuses including Easy, Base, Tempo, Threshold, VO2 Max, and Anaerobic. While threshold zones are great for effort measurement, you typically won’t stay in one zone during your training session and this is why training focus is added to EvoLab. In a nutshell, Training Focus is determined by the differences in training load for each threshold pace zone.
- Easy: This training helps with recovery.
- Base: This training improves basic aerobic endurance.
- Tempo: This training improves the ability to control rhythm in races.
- Threshold: This training improves pacing at lactate threshold pace.
- VO2 Max: This training improves VO2 Max.
- Anaerobic: This training improves anaerobic endurance.
Training Load measures the impact brought to your body from the training. Each workout tracked using a COROS device receives a training load score based on training impulse (TRIMP), a well-established method of quantifying training load using heart rate and workout time.
Training Load can be added to data pages on your COROS watch to be viewed in real-time to gauge the intensity and duration of your training. Longer and more intense training yields a higher training load score. Compare your training load in your COROS watch or via the COROS app to see how today’s training compares to similar activities in the past.
Training Status is calculated based on a rolling average of 7 and 42 days of training data, and tells you how effective your most recent training was. It consists of your Base Fitness, Load Impact, and Intensity Trend.